Top pressing and wrapping packaging machine

Product Description:

Stable: Stationary cantilever design for heavy/irregular loads, no tipping.
Fast: 2-in-1 wrap & strap, doubles packaging efficiency.
Eco-friendly: 300% pre-stretch saves film and costs.
Smart: One-touch PLC control, fully automatic, fits production lines.
Durable: Heavy-duty gantry structure, stable & long-lasting.

Features:

Nationwide joint guarantee
Worry-free shopping
Lifetime maintenance

Detailed Description

This TANNENG fully automatic cantilever integrated wrapping & strapping machine adopts an innovative “stationary load, rotating cantilever” operation mode, integrating automatic stretch film wrapping and full-automatic PET/PP strapping in one process. It completes dual reinforcement at one time, ideal for heavy, tall, unstable and irregular pallet goods. Equipped with a power pre-stretch film carriage (up to 300% stretch ratio) to significantly reduce film consumption, and a PLC intelligent control system for freely setting wrapping layers, strapping times and tension, it supports automatic film feeding/cutting and production line integration. With stable operation and high efficiency, it is widely used in logistics, building materials, chemical, food and other industries, helping enterprises realize the automation, standardization and efficiency upgrade of packaging processes.

Specifications:

Item	Parameter	Remarks
Power	4500W	–
Power Supply	3 – phase 5 – wire AC 380V/50Hz	–
Cargo Size Range	130010001500mm	Customizable as required
Minimum Cargo Height	650mm	–
Tightening Force	300KG (3000N)	Adjustable on site
Strapping Material	PP strap for machine use	–
Strapping Specification	Width: 15mm, Thickness: 0.8mm; Paper core inner diameter: 406mm	–
Joint Type / Joint Strength	Friction (heating) welding / 85% (master strap)	Depends on strap quality
Sword – through Drive Mode	Reducer + drive wheel	–
Strapping Speed	25 seconds per strip	Single equipment efficiency
Strapping Spacing	Customizable as required	–
Sword – through Height	According to production line height	–
Lifting Mode	Sprocket chain (T – shaped guide rail)	–

No.	Component Name	Brand	Origin	Remarks
1	PLC	Siemens	Germany	–
2	Touch Screen	Siemens	Germany	–
3	Inverter	Siemens	Germany	–
4	Electrical Pushbuttons	CHINT	China	–
5	Photoelectric Switch	Banner	USA	–
6	Proximity Switch	Omron	Japan	–
7	Terminal Blocks	Weidmüller	Germany	–
8	Limit Switch	CHINT	China	–

FAQ:

Why does stretch film easily break when wrapping?

There are three common reasons: (1) the tension of the stretch film is set too high; (2) the film is thin, brittle, or damaged; (3) the film carriage or roller is stuck, causing uneven force. The solutions are to appropriately reduce the tension, use high-quality stretch film, and clean the guide rollers.
What should I do if the goods in the package are loose?

(1) Increase the stretch ratio of the film to achieve tighter packaging; (2) Slow down the hoist speed of the rack to improve film overlap; (3) Check if the pre-stretch mechanism is working properly without slipping; (4) Wrap 2–3 more layers at the bottom of the goods to better secure them.
Why does the turntable not rotate or run slowly after starting?

First, check whether the emergency stop button has been reset and whether the inverter parameters have been incorrectly adjusted. Then check if the chain or belt is loose or slipping, and whether the motor is abnormal. Low-speed force is usually caused by a low inverter current setting or the brake not being released; readjust the parameters to correct it.
How to deal with increased noise after long-term use?

The main reasons are insufficient lubrication or loose parts. (1) Lubricate the turntable bearings, chains, and gears; (2) Tighten loose screws, film holders, and covers; (3) Clean debris under the turntable to avoid friction noise. Regular maintenance can greatly reduce noise.